Onoda, A.

ACS Catal. 2014, 4, 2645-2648, 10.1021/cs500392e

The hydrogen-evolving diiron complex, (μ-S)2Fe2(CO)6 with a tethered maleimide moiety was synthesized and covalently embedded within the cavity of a rigid β-barrel protein matrix by coupling a maleimide moiety to a cysteine residue within the β-barrel. The (μ-S)2Fe2(CO)6 core within the cavity was characterized by UV–vis absorption and a characteristic CO vibration determined by IR measurements. The diiron complex embedded within the cavity retains the necessary catalytic activity (TON up to 130 for 6 h) to evolve H2 via a photocatalytic cycle with a Ru photosensitizer in a solution of 100 mM ascorbate and 50 mM Tris/HCl at pH 4.0 and 25 °C.

Mangiatordi, G.F.; Salmain, M.

J. Mol. Catal. B: Enzym. 2015, 122, 314-322, 10.1016/j.molcatb.2015.10.007

Two half-sandwich d6-rhodium(III) complexes of the general formula [(η5-Cp*)Rh(N^N)Cl]Cl where N^N is a phenanthroline or a bispyridine methane derivative carrying a thiol-targeting maleimide or chloroacetamide function were synthesized and characterized. Both complexes were able to catalyse the transfer hydrogenation of 2,2,2-trifluoroacetophenone in aqueous medium using formate or phosphite as hydrogen donor. Covalent anchoring of these complexes to the cysteine endoproteinase papain yielded hybrid metalloproteins with transfer hydrogenase properties. Under optimized conditions of pH, hydrogen donor concentration and catalyst load, conversion of substrate was nearly quantitative within 24 h at 40 °C and the (S)-enantiomer was obtained preferably albeit with a modest enantiomeric excess of 7–10%. Covalent docking simulations complemented the experimental findings suggesting a molecular rationale for the observed low enantioselectivity. The harmonious use of experimental and theoretical approaches represents an unprecedented starting point for driving the rational design of artificial metalloenzymes built up from papain with higher catalytic efficiency.

Tiller, J.C.

ChemBioChem 2015, 16, 83-90, 10.1002/cbic.201402339

Count Os in: We report organosoluble artificial metalloenzymes, generated from poly(2‐methyl‐oxazoline) enzyme conjugates and osmate as a promising new catalytic system for the dihydroxylation of alkenes in organic media.

Ueno, T.; Watanabe, Y.

J. Am. Chem. Soc. 2009, 131, 6958-6960, 10.1021/ja901234j

Polymerization reactions of phenylacetylene derivatives are promoted by rhodium complexes within the discrete space of apo-ferritin in aqueous media. The catalytic reaction provides polymers with restricted molecular weight and a narrow molecular weight distribution. These results suggest that protein nanocages have potential for use as various reaction spaces through immobilization of metal catalysts on the interior surfaces of the protein cages.

Kitagawa, S.; Ueno, T.

Chem. - Asian J. 2014, 9, 1373-1378, 10.1002/asia.201301347

Porous protein crystals, which are protein assemblies in the solid state, have been engineered to form catalytic vessels by the incorporation of organometallic complexes. Ruthenium complexes in cross‐linked porous hen egg white lysozyme (HEWL) crystals catalyzed the enantioselective hydrogen‐transfer reduction of acetophenone derivatives. The crystals accelerated the catalytic reaction and gave different enantiomers based on the crystal form (tetragonal or orthorhombic). This method represents a new approach for the construction of bioinorganic catalysts from protein crystals.

Hayashi, T

J. Am. Chem. Soc. 2007, 129, 12906-12907, 10.1021/ja074685f

The iron porphycene with two propionates at the peripheral positions of the framework was incorporated into the heme pocket of horseradish peroxidase. In the presence of hydrogen peroxide, the ferric iron porphycene was smoothly converted into the iron(IV)-oxo porphycene π-cation radical species, which was confirmed by the appearance of a band around 800 nm in the UV−vis spectrum. The protein with the iron porphycene showed a 10-fold higher reactivity for the thioanisole oxidation when compared to the native protein. In contrast, the guaiacol oxidation proceeded with similar reaction rates in both proteins. The kinetic analyses indicated that the ferric porphycene in the protein more slowly reacts with hydrogen peroxide than the native heme, whereas the high oxidation states show higher reactivities during oxidations of an organic substrate. The formation of the iron(IV)-oxo species of porphycene and its reactivities in the hemoprotein matrix are demonstrated.

Matsuo, T.

Chem. - Asian J. 2011, 6, 2491-2499, 10.1002/asia.201100107

H64D myoglobin mutant was reconstituted with two different types of synthetic hemes that have aromatic rings and a carboxylate‐based cluster attached to the terminus of one or both of the heme‐propionate moieties, thereby forming a “single‐winged cofactor” and “double‐winged cofactor,” respectively. The reconstituted mutant myoglobins have smaller Km values with respect to 2‐methoxyphenol oxidation activity relative to the parent mutant with native heme. This suggests that the attached moiety functions as a substrate‐binding domain. However, the kcat value of the mutant myoglobin with the double‐winged cofactor is much lower than that of the mutant with the native heme. In contrast, the mutant reconstituted with the single‐winged cofactor has a larger kcat value, thereby resulting in overall catalytic activity that is essentially equivalent to that of the native horseradish peroxidase. Enhanced peroxygenase activity was also observed for the mutant myoglobin with the single‐winged cofactor, thus indicating that introduction of an artificial substrate‐binding domain at only one of the heme propionates in the H64D mutant is the optimal engineering strategy for improving the peroxidase activity of myoglobin.

Filice, M.; Palomo, J.M.

Adv. Synth. Catal. 2015, 357, 2687-2696, 10.1002/adsc.201500014

A p‐nitrophenylphosphonate palladium pincer was synthesized and selectively inserted by irreversible attachment on the catalytic serine of different commercial lipases with good to excellent yields in most cases. Among all, lipase from Candida antarctica B (CAL‐B) was the best modified enzyme. The artificial metalloenzyme CAL‐B‐palladium (Pd) catalyst was subsequently immobilized on different supports and by different orienting strategies. The catalytic properties of the immobilized hybrid catalysts were then evaluated in two sets of Heck cross‐coupling reactions under different conditions. In the first reaction between iodobenzene and ethyl acrylate, the covalent immobilized CAL‐B‐Pd catalyst resulted to be the best one exhibiting quantitative production of the Heck product at 70 °C in dimethylformamide (DMF) with 25% water and particularly in pure DMF, where the soluble Pd pincer was completely inactive. A post‐immobilization engineering of catalyst surface by its hydrophobization enhanced the activity. The selectivity properties of the best hybrid catalyst were then assessed in the asymmetric Heck cross‐coupling reaction between iodobenzene and 2,3‐dihydrofuran retrieving excellent results in terms of stereo‐ and enantioselectivity.

Lewis, J.C.

Artificial Metalloenzymes and MetalloDNAzymes in Catalysis: From Design to Applications 2018, 1-40, 10.1002/9783527804085.ch1

Transition metal catalysts and enzymes are ubiquitous tools for chemical synthesis. Potential benefits of combining complementary properties of these catalysts have driven efforts to create artificial metalloenzymes (ArMs), hybrid constructs comprised of synthetic metal centers embedded within protein scaffolds. This unique composition necessitates the use of synthetic chemistry, bioconjugation methodology, and protein engineering for ArM formation. Despite this challenge, a range of approaches for ArM formation has been developed. This chapter provides an overview of these different approaches and discussion of potential advantages and disadvantages of each.

Watanabe, Y.

Angew. Chem. Int. Ed. 2003, 42, 1005-1008, 10.1002/anie.200390256

Insertion of a symmetric metal complex, [CrIII(5,5′‐tBu‐salophen)]+ (H2salophen=N,N′‐bis(salicylidene)‐1,2‐phenylenediamine), into the active site of apomyoglobin is demonstrated (see picture). The metal ion and the ligand structure are very important factors that influence the binding affinity of the metal complex with the myoglobin (Mb) cavity. Semisynthetic metalloenzymes can catalyze enantioselective sulfoxidation by using the chiral protein cavity.

Ward, T.R.

Curr. Opin. Biotechnol. 2010, 21, 744-752, 10.1016/j.copbio.2010.09.004

Artificial metalloenzymes result from the introduction of a catalytically competent non-native metal cofactor within a protein environment. In the present contribution, we summarize the recent achievements in the design and the optimization of such protein-based hybrid catalysts, with an emphasis on enantioselective transformations. The second part outlines the milestones required to achieve en masse production, screening and directed evolution of artificial metalloenzymes. In the spirit of Darwinian evolution, this will allow the full potential of such protein-based hybrid catalysts to be fully unraveled, thus complementing both homogeneous and enzymatic catalysis.

Tiede, D.M.; Utschig, L.M.

J. Am. Chem. Soc. 2013, 135, 13246-13249, 10.1021/ja405277g

The direct conversion of sunlight into fuel is a promising means for the production of storable renewable energy. Herein, we use Nature’s specialized photosynthetic machinery found in the Photosystem I (PSI) protein to drive solar fuel production from a nickel diphosphine molecular catalyst. Upon exposure to visible light, a self-assembled PSI-[Ni(P2PhN2Ph)2](BF4)2 hybrid generates H2 at a rate 2 orders of magnitude greater than rates reported for photosensitizer/[Ni(P2PhN2Ph)2](BF4)2 systems. The protein environment enables photocatalysis at pH 6.3 in completely aqueous conditions. In addition, we have developed a strategy for incorporating the Ni molecular catalyst with the native acceptor protein of PSI, flavodoxin. Photocatalysis experiments with this modified flavodoxin demonstrate a new mechanism for biohybrid creation that involves protein-directed delivery of a molecular catalyst to the reducing side of Photosystem I for light-driven catalysis. This work further establishes strategies for constructing functional, inexpensive, earth-abundant solar fuel-producing PSI hybrids that use light to rapidly produce hydrogen directly from water.

Pecoraro, V.L.

Chem. Rev. 2014, 114, 3495-3578, 10.1021/cr400458x

n/a

Kitagawa, S.; Ueno, T.

Isr. J. Chem. 2015, 55, 40-50, 10.1002/ijch.201400097

Construction of artificial metalloenzymes based on protein assemblies is a promising strategy for the development of new catalysts, because the three‐dimensional nanostructures of proteins with defined individual sizes can be used as molecular platforms that allow the arrangement of catalytic active centers on their surfaces. Protein needles/tubes/fibers are suitable for supporting various functional molecules, including metal complexes, synthetic molecules, metal nanoparticles, and enzymes with high densities and precise locations. Compared with bulk systems, the protein tube‐ and fiber‐based materials have higher activities for catalytic reactions and electron transfer, as well as enhanced functions when used in electronic devices. The natural and synthetic protein tubes and fibers are constructed by self‐assembly of monomer proteins or peptides. For more precise designs of arrangements of metal complexes, we have developed a new conceptual framework, based on the isolation of a robust needle structure from the cell‐puncturing domains of a bacteriophage. The artificial protein needle shows great promise for use in creating efficient catalytic systems by providing the means to arrange the locations of various metal complexes on the protein surface. In this account, we discuss the recent development of protein needle‐based metalloenzymes, and the future developments we are anticipating in this field.

Song, W.J.

Chem. Commun. 2020, 56, 9586-9599, 10.1039/d0cc03137b

By combining synthetic catalysts and biochemical tools, numerous artificial metalloenzymes have been designed to exhibit high catalytic activity and selectivity in diverse chemical transformations. Out of the nearly infinite number of discovered or characterised proteins, however, only a handful of proteins have been employed as scaffolds for artificial metalloenzymes, implying that specific proteins are preferred owing to their native structural, functional, or biochemical properties. In the present review, we extract and group the biochemical and structural properties of proteins that are advantageous in the design of artificial metalloenzymes; protein stability, pre-existing metal centre, native binding affinity for small molecules, confined and empty space, well-defined secondary structure, and native cellular location. The desirable properties highlight proteins as the key players in the design of metal-dependent biocatalysts. We also propose rarely considered, yet promising, proteins that could be versatile and unique scaffolds for novel metalloenzymes.

Ward, T.R.

Molecular Encapsulation: Organic Reactions in Constrained Systems 2010, 361-376, 10.1002/9780470664872.ch13

n/a

Salmain, M.

Eur. J. Inorg. Chem. 2018, 2018, 1383-1393, 10.1002/ejic.201701359

Biohybrid catalysts resulting from the dative anchoring of half‐sandwich organometallic complexes [M(arene)(H2O)x(Cl)y]n+ (M = RuII, arene = η6‐benzene, p‐cymene or mesitylene; M = IrIII, RhIII, arene = η5‐Cp*; x = 1–3, y = 0–2, n = 0–2) to bovine beta‐lactoglobulin (βLG) or hen egg white lysozyme showed unprecedented behaviour. These constructs were shown to catalyse the asymmetric transfer hydrogenation of aryl ketones in water with sodium formate as hydrogen donor at a much faster rate than the complexes alone. Full conversion of the benchmark substrate 2,2,2‐trifluoroacetophenone was reached with an ee of 86 % for the most selective biohybrid. Surprisingly, even the crude biohybrid gave a good ee despite the presence of non‐protein‐bound metal species in the reaction medium. Other aryl ketones were reduced in the same way, and the highest ee was obtained for ortho‐substituted acetophenone derivatives. Furthermore, treatment of βLG with dimethyl pyrocarbonate resulted in a noticeable decrease of the activity and selectivity of the biohybrid, indicating that the sole accessible histidine residue (His146) was probably involved in the coordination and activation of Ru(benzene). This work underscores that protein scaffolds are efficient chiral ligands for asymmetric catalysis. The use of sodium formate instead of dihydrogen makes this approach safe, inexpensive and environmentally friendly.

Lu, Y.

Chem. Commun. 2008, 1665, 10.1039/b718915j

We demonstrate that incorporation of MnSalen into a protein scaffold enhances the chemoselectivity in sulfoxidation of thioanisole and find that both the polarity and hydrogen bonding of the protein scaffold play an important role in tuning the chemoselectivity.

Ghirlanda, G.

Chem. Commun. 2014, 50, 15852-15855, 10.1039/c4cc06700b

Hydrogen is an attractive fuel with potential for production scalability, provided that inexpensive, efficient molecular catalysts utilizing base metals can be developed for hydrogen production. Here we show for the first time that cobalt myoglobin (CoMyo) catalyzes hydrogen production in mild aerobic conditions with turnover number of 520 over 8 hours. Compared to free Co-protoporphyrin IX, incorporation into the myoglobin scaffold results in a 4-fold increase in photoinduced hydrogen production activity. Engineered variants in which specific histidine resides in proximity of the active site were mutated to alanine result in modulation of the catalytic activity, with the H64A/H97A mutant displaying activity 2.5-fold higher than wild type. Our results demonstrate that protein scaffolds can augment and modulate the intrinsic catalytic activity of molecular hydrogen production catalysts.

Imperiali, B.

Prot. Eng. 1997, 10, 691-698, 10.1093/protein/10.6.691

The transaminase activity of two new semisynthetic RNase-S proteins incorporating a pyridoxamine moiety at the active site has been evaluated. A chemically competent derivative of pyridoxamine phosphate was incorporated into the C-peptide fragments of these non-covalent protein complexes in the form of an unnatural coenzyme-amino acid chimera, 'Pam'. The chimeric Pam residue integrates the heterocyclic functionality of pyridoxamine phosphate into the side chain of an alpha-amino acid and was introduced instead of Phe8 into the C-peptide sequence via standard solid phase methodology. The two semisynthetic Pam-RNase constructs were designed to probe whether the native ribonuclease catalytic machinery could be enlisted to modulate a pyridoxamine-dependent transamination reaction. Both RNase complexes, H1SP and S1SP, exhibited modest rate enhancements in the Cu(II)-assisted transamination of pyruvate to alanine under single turnover conditions, relative to 5'-deoxypyridoxamine and the uncomplexed C-peptide fragments. Furthermore, multiple turnovers of substrates were achieved in the presence of added L-phenylalanine due to recycling of the pyridoxamine moiety. The modest chiral inductions observed in the catalytic production of alanine and the differences in reactivity between the two proteins could be rationalized by the participation of a general base (His12) in complex H1SP, and by the increased tolerance for large amino acid substrates by complex S1SP, which contains serine at this position. The pyridoxamine-amino acid chimera will be useful in the future for examining the coenzyme structure/ function relationships in a native-like peptidyl architecture.

Birnbaum, E.R.; Darnall, D.W.

J. Biol. Chem. 1970, n/a

The rate of activation of the conversion of trypsinogen to trypsin has been found to be greatly accelerated by the neodymium(III) ion. The similarity of this process to the calcium(II) ion activation suggests that both metal ions bind at identical sites in trypsinogen. The rate of activation in the presence of the neodymium ion is much greater than that of the calcium ion, probably reflecting the increased stability constant of the neodymium-protein complex. In contrast to the calcium ion, however, neodymium(III) can be scrutinized by a variety of spectral and magnetic techniques which should reveal information concerning the calcium ion binding sites in proteins. Since the chemistry and the range of sires of the rare earth metal ions are so similar to that of the calcium ion, it is suggested that generally these ions should make good replacement ions for probing the calcium ion binding sites of proteins and enzymes.

Liu, X.; Tian, C.; Wang, J.

ACS Catal. 2021, 11, 5628-5635, 10.1021/acscatal.1c00287

Photosystem I (PSI) is a very large membrane protein complex (∼1000 kDa) harboring P700*, the strongest reductant known in biological systems, which is responsible for driving NAD(P)+ and ultimately for CO2 reduction. Although PSI is one of the most important components in the photosynthesis machinery, it has remained difficult to enhance PSI functions through genetic engineering due to its enormous complexity. Inspired by PSI’s ability to undergo multiple-step photo-induced electron hopping from P700* to iron–sulfur [Fe4S4] clusters, we designed a 33 kDa miniature photocatalytic CO2-reducing enzyme (mPCE) harboring a chromophore (BpC) and two [Fe4S4] clusters (FeA/FeB). Through reduction potential fine-tuning, we optimized the multiple-step electron hopping from BpC to FeA/FeB, culminating in a CO2/HCOOH conversion quantum efficiency of 1.43%. As mPCE can be overexpressed with a high yield in Escherichia coli cells without requiring synthetic cofactors, further development along this route may result in rapid photo-enzyme quantum yield improvement and functional expansion through an efficient directed evolution process.

Lin, Y.-W.

ACS Catal. 2020, 10, 14359-14365, 10.1021/acscatal.0c04572

Design of artificial nucleases is essential in biotechnology and biomedicine, whereas few artificial nucleases can both cleave and degrade DNA molecules. Heme proteins are potential enzymes for DNA cleavage. Using a small heme protein, myoglobin (Mb), as a model protein, we engineered a metal-binding motif of [1-His-1-Glu] (native His64 and mutated Glu29) in the heme distal site. The single mutant of L29E Mb was capable of not only efficient DNA cleavage but also DNA degradation upon Mg2+ binding to the heme distal site, as shown by an X-ray crystal structure of the Mg2+-L29E Mb complex. Molecular docking of the protein–DNA complex revealed multiple hydrogen-bonding interactions at their interfaces, involving both minor and major grooves of DNA. Moreover, both the distal Arg45 and the ligand Glu29 were identified as critical residues for the nuclease activity. This study reports the structure of a water-bridged heterodinuclear center of Mg-heme (Mg2+-H2O-Fe3+), showing a similar function as the homodinuclear center (MgA2+-H2O–MgB2+) in natural nuclease, which indicates that the Mg2+-L29E Mb complex is an effective artificial nuclease.

Lu, Y.

Nature 2009, 462, 1079-1082, 10.1038/nature08620

Protein design provides a rigorous test of our knowledge about proteins and allows the creation of novel enzymes for biotechnological applications. Whereas progress has been made in designing proteins that mimic native proteins structurally1,2,3, it is more difficult to design functional proteins4,5,6,7,8. In comparison to recent successes in designing non-metalloproteins4,6,7,9,10, it is even more challenging to rationally design metalloproteins that reproduce both the structure and function of native metalloenzymes5,8,11,12,13,14,15,16,17,18,19,20. This is because protein metal-binding sites are much more varied than non-metal-containing sites, in terms of different metal ion oxidation states, preferred geometry and metal ion ligand donor sets. Because of their variability, it has been difficult to predict metal-binding site properties in silico, as many of the parameters, such as force fields, are ill-defined. Therefore, the successful design of a structural and functional metalloprotein would greatly advance the field of protein design and our understanding of enzymes. Here we report a successful, rational design of a structural and functional model of a metalloprotein, nitric oxide reductase (NOR), by introducing three histidines and one glutamate, predicted as ligands in the active site of NOR, into the distal pocket of myoglobin. A crystal structure of the designed protein confirms that the minimized computer model contains a haem/non-haem FeB centre that is remarkably similar to that in the crystal structure. This designed protein also exhibits NO reduction activity, and so models both the structure and function of NOR, offering insight that the active site glutamate is required for both iron binding and activity. These results show that structural and functional metalloproteins can be rationally designed in silico.

Lin, Y.-W.

Biotechnol. Appl. Biochem. 2019, 10.1002/bab.1788

Environmental pollutants, such as industrial dyes and halophenols, are harmful to human health, which urgently demand degradation. Bioremediation has been shown to be a cost‐effective and ecofriendly approach. As reviewed herein, significant progress has been made in the last decade for biodegradation of both industrial dyes and halophenols, by engineering of native dye‐decolorizing peroxidases (DyPs) and dehaloperoxidases (DHPs), and by design of artificial heme enzymes in both native and de novo protein scaffolds. The catalytic efficiency of artificial DyPs and DHPs can be rationally designed comparable to or even beyond those of natural counterparts. The enzymes are on their way from laboratory to industry and will play more crucial roles in environmental protection toward a green future.

Ward, T.R.

Curr. Opin. Chem. Biol. 2014, 19, 99-106, 10.1016/j.cbpa.2014.01.018

Herein, we highlight a selection of recent successes in the creation of artificial metalloenzymes. A particular emphasis is set on different anchoring methods to incorporate the abiotic metal cofactor within the host protein as well as promising strategies for the de novo design of artificial metalloenzymes. Both approaches yield promiscuous catalytic activities which expand the catalytic repertoire of biocatalysis and synthetic biology. Moreover, we summarize laboratory evolution protocols which have contributed to unravel the full potential of artificial metalloenzymes.

Matsuo, T.

Tetrahedron Lett. 2019, 60, 151226, 10.1016/j.tetlet.2019.151226

Organic synthesis using biocatalysts has been developed over many years and is still a prominent area of research. In this context, various hybrid biocatalysts composed of a synthetic metal complex catalyst and a protein scaffold (i.e. artificial metalloenzymes) have been constructed. One of the most recent research areas in biocatalysts-mediated synthesis is CC bond/cleavage, the most important type of reaction in organic chemistry. Some of the artificial enzymes were applied to in-cell reactions as well as in vitro systems. The effects of the structural fluctuation in biomacromolecules on their functions have also been realized. This review article includes recent research examples of artificial metalloenzymes used to CC bond formation/cleavage. As a perspective, we also focus on how we apply protein dynamics factor for the creation of new generation artificial metalloenzymes.

Ghattas, W.; Mahy, J.-P.

J. Am. Chem. Soc. 2018, 140, 8756-8762, 10.1021/jacs.8b04326

Artificial metalloenzymes are known to be promising tools for biocatalysis, but their recent compartmentalization has led to compatibly with cell components thus shedding light on possible therapeutic applications. We prepared and characterized artificial metalloenzymes based on the A2A adenosine receptor embedded in the cytoplasmic membranes of living human cells. The wild type receptor was chemically engineered into metalloenzymes by its association with strong antagonists that were covalently bound to copper(II) catalysts. The resulting cells enantioselectively catalyzed the abiotic Diels–Alder cycloaddition reaction of cyclopentadiene and azachalcone. The prospects of this strategy lie in the organ-confined in vivo preparation of receptor-based artificial metalloenzymes for the catalysis of reactions exogenous to the human metabolism. These could be used for the targeted synthesis of either drugs or deficient metabolites and for the activation of prodrugs, leading to therapeutic tools with unforeseen applications.

Hu, X.; Shima, S.

Nat. Chem. 2015, 7, 995-1002, 10.1038/Nchem.2382

[Fe]-Hydrogenase catalyses the reversible hydrogenation of a methenyltetrahydromethanopterin substrate, which is an intermediate step during the methanogenesis from CO2 and H2. The active site contains an iron-guanylylpyridinol cofactor, in which Fe2+ is coordinated by two CO ligands, as well as an acyl carbon atom and a pyridinyl nitrogen atom from a 3,4,5,6-substituted 2-pyridinol ligand. However, the mechanism of H2 activation by [Fe]-hydrogenase is unclear. Here we report the reconstitution of [Fe]-hydrogenase from an apoenzyme using two FeGP cofactor mimics to create semisynthetic enzymes. The small-molecule mimics reproduce the ligand environment of the active site, but are inactive towards H2 binding and activation on their own. We show that reconstituting the enzyme using a mimic that contains a 2-hydroxypyridine group restores activity, whereas an analogous enzyme with a 2-methoxypyridine complex was essentially inactive. These findings, together with density functional theory computations, support a mechanism in which the 2-hydroxy group is deprotonated before it serves as an internal base for heterolytic H2 cleavage.

Hayashi, T

Methods Enzymol. 2016, 439-454, 10.1016/bs.mie.2016.05.049

An important strategy used in engineering of hemoproteins to generate artificial enzymes involves replacement of heme with an artificial cofactor after removal of the native heme cofactor under acidic conditions. Replacement of heme in an enzyme with a nonnatural metalloporphyrinoid can significantly alter the reactivity of the enzyme. This chapter describes the design and synthesis of three types of artificial metalloporphyrinoid cofactors consisting of mono-, di-, and tri-anionic ligands (tetradehydrocorrin, porphycene, and corrole, respectively). In addition, practical procedures for the preparation of apo-hemoproteins, incorporation of artificial cofactors, and characterization techniques are presented. Furthermore, the representative catalytic activities of artificial enzymes generated by reconstitution of hemoproteins are summarized.