6 publications

6 publications

Catalytic Cyclopropanation by Myoglobin Reconstituted with Iron Porphycene: Acceleration of Catalysis due to Rapid Formation of the Carbene Species

Hasegawa, J.-Y.; Lehnert, N.

J. Am. Chem. Soc. 2017, 139, 17265-17268, 10.1021/jacs.7b10154

Myoglobin reconstituted with iron porphycene catalyzes the cyclopropanation of styrene with ethyl diazoacetate. Compared to native myoglobin, the reconstituted protein significantly accelerates the catalytic reaction and the kcat/Km value is 26-fold enhanced. Mechanistic studies indicate that the reaction of the reconstituted protein with ethyl diazoacetate is 615-fold faster than that of native myoglobin. The metallocarbene species reacts with styrene with the apparent second-order kinetic constant of 28 mM–1 s–1 at 25 °C. Complementary theoretical studies support efficient carbene formation by the reconstituted protein that results from the strong ligand field of the porphycene and fewer intersystem crossing steps relative to the native protein. From these findings, the substitution of the cofactor with an appropriate metal complex serves as an effective way to generate a new biocatalyst.


Metal: Fe
Ligand type: Amino acid; Porphycene
Host protein: Myoglobin (Mb)
Anchoring strategy: Reconstitution
Optimization: ---
Reaction: Cyclopropanation
Max TON: ---
ee: ---
PDB: ---
Notes: Cyclopropanation of styrene with ethyl diazoacetate: kcat/KM = 1.3 mM-1 * s-1, trans/cis = 99:1

Crystal Structure and Peroxidase Activity of Myoglobin Reconstituted with Iron Porphycene

Hayashi, T

Inorg. Chem. 2006, 45, 10530-10536, 10.1021/ic061130x

The incorporation of an artificially created metal complex into an apomyoglobin is one of the attractive methods in a series of hemoprotein modifications. Single crystals of sperm whale myoglobin reconstituted with 13,16-dicarboxyethyl-2,7-diethyl-3,6,12,17-tetramethylporphycenatoiron(III) were obtained in the imidazole buffer, and the 3D structure with a 2.25-Å resolution indicates that the iron porphycene, a structural isomer of hemin, is located in the normal position of the heme pocket. Furthermore, it was found that the reconstituted myoglobin catalyzed the H2O2-dependent oxidations of substrates such as guaiacol, thioanisole, and styrene. At pH 7.0 and 20 °C, the initial rate of the guaiacol oxidation is 11-fold faster than that observed for the native myoglobin. Moreover, the stopped-flow analysis of the reaction of the reconstituted protein with H2O2 suggested the formation of two reaction intermediates, compounds II- and III-like species, in the absence of a substrate. It is a rare example that compound III is formed via compound II in myoglobin chemistry. The enhancement of the peroxidase activity and the formation of the stable compound III in myoglobin with iron porphycene mainly arise from the strong coordination of the Fe−His93 bond.


Metal: Fe
Ligand type: Porphycene
Host protein: Myoglobin (Mb)
Anchoring strategy: Reconstitution
Optimization: ---
Max TON: ---
ee: ---
PDB: 1MBI
Notes: ---

C(sp3)–H Bond Hydroxylation Catalyzed by Myoglobin Reconstituted with Manganese Porphycene

Hayashi, T

J. Am. Chem. Soc. 2013, 135, 17282-17285, 10.1021/ja409404k

Myoglobin reconstituted with manganese porphycene was prepared in an effort to generate a new biocatalyst and was characterized by spectroscopic techniques. The X-ray crystal structure of the reconstituted protein reveals that the artificial cofactor is located in the intrinsic heme-binding site with weak ligation by His93. Interestingly, the reconstituted protein catalyzes the H2O2-dependent hydroxylation of ethylbenzene to yield 1-phenylethanol as a single product with a turnover number of 13 at 25 °C and pH 8.5. Native myoglobin and other modified myoglobins do not catalyze C–H hydroxylation of alkanes. Isotope effect experiments yield KIE values of 2.4 and 6.1 for ethylbenzene and toluene, respectively. Kinetic data, log kobs versus BDE(C(sp3)–H) for ethylbenzene, toluene, and cyclohexane, indicate a linear relationship with a negative slope. These findings clearly indicate that the reaction occurs via a rate-determining step that involves hydrogen-atom abstraction by a Mn(O) species and a subsequent rebound hydroxylation process which is similar to the reaction mechanism of cytochrome P450.


Metal: Mn
Ligand type: Porphycene
Host protein: Myoglobin (Mb)
Anchoring strategy: Reconstitution
Optimization: ---
Reaction: Hydroxylation
Max TON: ---
ee: ---
PDB: 2WI8
Notes: ---

Highly Malleable Harm-Binding Site of the Haemoprotein HasA Permits Stable Accommodation of Bulky Tetraphenylporphycenes

Shoji, O.

RSC Adv. 2019, 9, 18697-18702, 10.1039/c9ra02872b

Iron(III)- and cobalt(III)-9,10,19,20-tetraphenylporphycenes, which possess bulky phenyl groups at the four meso positions of porphycene, were successfully incorporated into the haem acquisition protein HasA secreted by Pseudomonas aeruginosa. Crystal structure analysis revealed that loops surrounding the haem-binding site are highly flexible, remodelling themselves to accommodate bulky metal complexes with significantly different structures from the native haem cofactor.


Metal: Co; Fe
Ligand type: Porphycene
Host protein: HasA
Anchoring strategy: Dative
Optimization: Chemical & genetic
Reaction: ---
Max TON: ---
ee: ---
PDB: ---
Notes: ---

Manganese(V) Porphycene Complex Responsible for Inert C–H Bond Hydroxylation in a Myoglobin Matrix

Oohora, K.

J. Am. Chem. Soc. 2017, 139, 18460-18463, 10.1021/jacs.7b11288

A mechanistic study of H2O2-dependent C–H bond hydroxylation by myoglobin reconstituted with a manganese porphycene was carried out. The X-ray crystal structure of the reconstituted protein obtained at 1.5 Å resolution reveals tight incorporation of the complex into the myoglobin matrix at pH 8.5, the optimized pH value for the highest turnover number of hydroxylation of ethylbenzene. The protein generates a spectroscopically detectable two-electron oxidative intermediate in a reaction with peracid, which has a half-life up to 38 s at 10 °C. Electron paramagnetic resonance spectra of the intermediate with perpendicular and parallel modes are silent, indicating formation of a low-spin MnV-oxo species. In addition, the MnV-oxo species is capable of promoting the hydroxylation of sodium 4-ethylbenzenesulfonate under single turnover conditions with an apparent second-order rate constant of 2.0 M–1 s–1 at 25 °C. Furthermore, the higher bond dissociation enthalpy of the substrate decreases the rate constant, in support of the proposal that the H-abstraction is one of the rate-limiting steps. The present engineered myoglobin serves as an artificial metalloenzyme for inert C–H bond activation via a high-valent metal species similar to the species employed by native monooxygenases such as cytochrome P450.


Metal: Mn
Ligand type: Amino acid; Porphycene
Host protein: Myoglobin (Mb)
Anchoring strategy: Reconstitution
Optimization: ---
Reaction: Hydroxylation
Max TON: 13
ee: ---
PDB: 5YL3
Notes: ---

Porphyrinoid Chemistry in Hemoprotein Matrix:  Detection and Reactivities of Iron(IV)-Oxo Species of Porphycene Incorporated into Horseradish Peroxidase

Hayashi, T

J. Am. Chem. Soc. 2007, 129, 12906-12907, 10.1021/ja074685f

The iron porphycene with two propionates at the peripheral positions of the framework was incorporated into the heme pocket of horseradish peroxidase. In the presence of hydrogen peroxide, the ferric iron porphycene was smoothly converted into the iron(IV)-oxo porphycene π-cation radical species, which was confirmed by the appearance of a band around 800 nm in the UV−vis spectrum. The protein with the iron porphycene showed a 10-fold higher reactivity for the thioanisole oxidation when compared to the native protein. In contrast, the guaiacol oxidation proceeded with similar reaction rates in both proteins. The kinetic analyses indicated that the ferric porphycene in the protein more slowly reacts with hydrogen peroxide than the native heme, whereas the high oxidation states show higher reactivities during oxidations of an organic substrate. The formation of the iron(IV)-oxo species of porphycene and its reactivities in the hemoprotein matrix are demonstrated.


Metal: Fe
Ligand type: Porphycene
Anchoring strategy: Reconstitution
Optimization: ---
Max TON: ---
ee: ---
PDB: ---
Notes: ---