Hartwig, J.F.

Nat. Chem. 2021, 13, 312-318, 10.1038/s41557-020-00633-7

Enzymatic reactions through mononuclear metal hydrides are unknown in nature, despite the prevalence of such intermediates in the reactions of synthetic transition-metal catalysts. If metalloenzymes could react through abiotic intermediates like these, then the scope of enzyme-catalysed reactions would expand. Here we show that zinc-containing carbonic anhydrase enzymes catalyse hydride transfers from silanes to ketones with high enantioselectivity. We report mechanistic data providing strong evidence that the process involves a mononuclear zinc hydride. This work shows that abiotic silanes can act as reducing equivalents in an enzyme-catalysed process and that monomeric hydrides of electropositive metals, which are typically unstable in protic environments, can be catalytic intermediates in enzymatic processes. Overall, this work bridges a gap between the types of transformation in molecular catalysis and biocatalysis.

Pecoraro, V.L.

Angew. Chem. Int. Ed. 2014, 53, 7900-7903, 10.1002/anie.201404925

Protein design will ultimately allow for the creation of artificial enzymes with novel functions and unprecedented stability. To test our current mastery of nature’s approach to catalysis, a ZnII metalloenzyme was prepared using de novo design. α3DH3 folds into a stable single‐stranded three‐helix bundle and binds ZnII with high affinity using His3O coordination. The resulting metalloenzyme catalyzes the hydration of CO2 better than any small molecule model of carbonic anhydrase and with an efficiency within 1400‐fold of the fastest carbonic anhydrase isoform, CAII, and 11‐fold of CAIII.

Tezcan, F.A.

Science 2014, 346, 1525-1528, 10.1126/science.1259680

The generation of new enzymatic activities has mainly relied on repurposing the interiors of preexisting protein folds because of the challenge in designing functional, three-dimensional protein structures from first principles. Here we report an artificial metallo-β-lactamase, constructed via the self-assembly of a structurally and functionally unrelated, monomeric redox protein into a tetrameric assembly that possesses catalytic zinc sites in its interfaces. The designed metallo-β-lactamase is functional in the Escherichia coli periplasm and enables the bacteria to survive treatment with ampicillin. In vivo screening of libraries has yielded a variant that displays a catalytic proficiency [(kcat/Km)/kuncat] for ampicillin hydrolysis of 2.3 × 106 and features the emergence of a highly mobile loop near the active site, a key component of natural β-lactamases to enable substrate interactions.

Janda, K.D.; Lerner, R.A.

J. Am. Chem. Soc. 1993, 115, 4906-4907, 10.1021/ja00064a068

n/a

Roelfes, G.

ChemBioChem 2020, 21, 3077-3081, 10.1002/cbic.202000306

We have examined the potential of the noncanonical amino acid (8-hydroxyquinolin-3-yl)alanine (HQAla) for the design of artificial metalloenzymes. HQAla, a versatile chelator of late transition metals, was introduced into the lactococcal multidrug-resistance regulator (LmrR) by stop codon suppression methodology. LmrR_HQAla was shown to complex efficiently with three different metal ions, CuII, ZnII and RhIII to form unique artificial metalloenzymes. The catalytic potential of the CuII-bound LmrR_HQAla enzyme was shown through its ability to catalyse asymmetric Friedel-Craft alkylation and water addition, whereas the ZnII-coupled enzyme was shown to mimic natural Zn hydrolase activity.

DeGrado, W.F.; Lombardi, A.

Proc. Natl. Acad. Sci. U.S.A. 2020, 117, 33246-33253, 10.1073/pnas.2017062117

We describe the de novo design of an allosterically regulated protein, which comprises two tightly coupled domains. One domain is based on the DF (Due Ferri in Italian or two-iron in English) family of de novo proteins, which have a diiron cofactor that catalyzes a phenol oxidase reaction, while the second domain is based on PS1 (Porphyrin-binding Sequence), which binds a synthetic Zn-porphyrin (ZnP). The binding of ZnP to the original PS1 protein induces changes in structure and dynamics, which we expected to influence the catalytic rate of a fused DF domain when appropriately coupled. Both DF and PS1 are four-helix bundles, but they have distinct bundle architectures. To achieve tight coupling between the domains, they were connected by four helical linkers using a computational method to discover the most designable connections capable of spanning the two architectures. The resulting protein, DFP1 (Due Ferri Porphyrin), bound the two cofactors in the expected manner. The crystal structure of fully reconstituted DFP1 was also in excellent agreement with the design, and it showed the ZnP cofactor bound over 12 Å from the dimetal center. Next, a substrate-binding cleft leading to the diiron center was introduced into DFP1. The resulting protein acts as an allosterically modulated phenol oxidase. Its Michaelis–Menten parameters were strongly affected by the binding of ZnP, resulting in a fourfold tighter Km and a 7-fold decrease in kcat. These studies establish the feasibility of designing allosterically regulated catalytic proteins, entirely from scratch.

Roelfes, G.

Dalton Trans. 2017, 46, 4325-4330, 10.1039/C7DT00533D

An artificial metalloenzyme containing both a regulatory and a catalytic domain is selectively activated in presence of Fe2+ ions.

Kuhlman, B.

Biochemistry 2012, 51, 3933-3940, 10.1021/bi201881p

Here we show that a recent computationally designed zinc-mediated protein interface is serendipitously capable of catalyzing carboxyester and phosphoester hydrolysis. Although the original motivation was to design a de novo zinc-mediated protein–protein interaction (called MID1-zinc), we observed in the homodimer crystal structure a small cleft and open zinc coordination site. We investigated if the cleft and zinc site at the designed interface were sufficient for formation of a primitive active site that can perform hydrolysis. MID1-zinc hydrolyzes 4-nitrophenyl acetate with a rate acceleration of 105 and a kcat/KM of 630 M–1 s–1 and 4-nitrophenyl phosphate with a rate acceleration of 104 and a kcat/KM of 14 M–1 s–1. These rate accelerations by an unoptimized active site highlight the catalytic power of zinc and suggest that the clefts formed by protein–protein interactions are well-suited for creating enzyme active sites. This discovery has implications for protein evolution and engineering: from an evolutionary perspective, three-coordinated zinc at a homodimer interface cleft represents a simple evolutionary path to nascent enzymatic activity; from a protein engineering perspective, future efforts in de novo design of enzyme active sites may benefit from exploring clefts at protein interfaces for active site placement.

Baker, D.

Nat. Chem. Biol. 2012, 8, 294-300, 10.1038/NChemBio.777

The ability to redesign enzymes to catalyze noncognate chemical transformations would have wide-ranging applications. We developed a computational method for repurposing the reactivity of metalloenzyme active site functional groups to catalyze new reactions. Using this method, we engineered a zinc-containing mouse adenosine deaminase to catalyze the hydrolysis of a model organophosphate with a catalytic efficiency (kcat/Km) of ∼104 M−1 s−1 after directed evolution. In the high-resolution crystal structure of the enzyme, all but one of the designed residues adopt the designed conformation. The designed enzyme efficiently catalyzes the hydrolysis of the RP isomer of a coumarinyl analog of the nerve agent cyclosarin, and it shows marked substrate selectivity for coumarinyl leaving groups. Computational redesign of native enzyme active sites complements directed evolution methods and offers a general approach for exploring their untapped catalytic potential for new reactivities.

Tezcan, F.A.

Nature 2020, 578, 172-176, 10.1038/s41586-019-1928-2

Many proteins exist naturally as symmetrical homooligomers or homopolymers1. The emergent structural and functional properties of such protein assemblies have inspired extensive efforts in biomolecular design2,3,4,5. As synthesized by ribosomes, proteins are inherently asymmetric. Thus, they must acquire multiple surface patches that selectively associate to generate the different symmetry elements needed to form higher-order architectures1,6—a daunting task for protein design. Here we address this problem using an inorganic chemical approach, whereby multiple modes of protein–protein interactions and symmetry are simultaneously achieved by selective, ‘one-pot’ coordination of soft and hard metal ions. We show that a monomeric protein (protomer) appropriately modified with biologically inspired hydroxamate groups and zinc-binding motifs assembles through concurrent Fe3+ and Zn2+ coordination into discrete dodecameric and hexameric cages. Our cages closely resemble natural polyhedral protein architectures7,8 and are, to our knowledge, unique among designed systems9,10,11,12,13 in that they possess tightly packed shells devoid of large apertures. At the same time, they can assemble and disassemble in response to diverse stimuli, owing to their heterobimetallic construction on minimal interprotein-bonding footprints. With stoichiometries ranging from [2 Fe:9 Zn:6 protomers] to [8 Fe:21 Zn:12 protomers], these protein cages represent some of the compositionally most complex protein assemblies—or inorganic coordination complexes—obtained by design.

Makhlynets, O.V.

J. Inorg. Biochem. 2020, 212, 111224, 10.1016/j.jinorgbio.2020.111224

Metalloproteins constitute nearly half of all proteins and catalyze some of the most complex chemical reactions. Recently, we reported a design of 4G-UFsc (Uno Ferro single chain), a single chain four-helical bundle with extraordinarily high (30 pM) affinity for zinc. We evaluated the contribution of different side chains to binding of Co(II), Ni(II), Zn(II) and Mn(II) using systematic mutagenesis of the amino acids that constitute the primary metal coordination and outer spheres. The binding affinity of proteins for metals was then measured using isothermal titration calorimetry. Our results show that both primary metal coordination environment and side chains in the outer sphere of UFsc are highly sensitive to even slight changes and can be adapted to binding different 3d metals, including hard-to-tightly bind metal ions such as Mn(II). The studies on the origins of tight metal binding will guide future metalloprotein design efforts.

Kim, H.S.

Science 2006, 311, 535-538, 10.1126/science.1118953

The design of enzymes with new functions and properties has long been a goal in protein engineering. Here, we report a strategy to change the catalytic activity of an existing protein scaffold. This was achieved by simultaneous incorporation and adjustment of functional elements through insertion, deletion, and substitution of several active site loops, followed by point mutations to fine-tune the activity. Using this approach, we were able to introduce β-lactamase activity into the αβ/βα metallohydrolase scaffold of glyoxalase II. The resulting enzyme, evMBL8 (evolved metallo β-lactamase 8), completely lost its original activity and, instead, catalyzed the hydrolysis of cefotaxime with a (kcat /Km)app of 1.8 × 102 (mole/liter)–1 second–1, thus increasing resistance to Escherichia coli growth on cefotaxime by a factor of about 100.

Hilvert, D.; Jiménez-Osés, G.

Nat. Chem. 2021, 13, 231-235, 10.1038/s41557-020-00628-4

New enzyme catalysts are usually engineered by repurposing the active sites of natural proteins. Here we show that design and directed evolution can be used to transform a non-natural, functionally naive zinc-binding protein into a highly active catalyst for an abiological hetero-Diels–Alder reaction. The artificial metalloenzyme achieves >104 turnovers per active site, exerts absolute control over reaction pathway and product stereochemistry, and displays a catalytic proficiency (1/KTS = 2.9 × 1010 M−1) that exceeds all previously characterized Diels–Alderases. These properties capitalize on effective Lewis acid catalysis, a chemical strategy for accelerating Diels–Alder reactions common in the laboratory but so far unknown in nature. Extension of this approach to other metal ions and other de novo scaffolds may propel the design field in exciting new directions.

Craik, C.S.

Biochemistry 1995, 34, 2172-2180, 10.1021/bi00007a010

Histidine substrate specificity has been engineered into trypsin by creating metal binding sites for Ni2+ and Zn2+ ions. The sites bridge the substrate and enzyme on the leaving-group side of the scissile bond. Application of simple steric and geometric criteria to a crystallographically derived enzyme- substrate model suggested that histidine specificity at the P2' position might be acheived by a tridentate site involving amino acid residues 143 and 151 of trypsin. Trypsin N143H/E151H hydrolyzes a P2'- His-containing peptide (AGPYAHSS) exclusively in the presence of nickel or zinc with a high level of catalytic efficiency. Since cleavage following the tyrosine residue is normally highly disfavored by trypsin, this result demonstrates that a metal cofactor can be used to modulate specificity in a designed fashion. The same geometric criteria applied in the primary SI binding pocket suggested that the single-site mutation D189H might effect metal-dependent His specificity in trypsin. However, kinetic and crystallographic analysis of this variant showed that the design was unsuccessful because His 189 rotates away from substrate causing a large perturbation in adjacent surface loops. This observation suggests that the reason specificity modification at the trypsin S1 site requires extensive mutagenesis is because the pocket cannot deform locally to accommodate alternate PI side chains. By taking advantage of the extended subsites, an alternate substrate specificity has been engineered into trypsin.

Pecoraro, V.L.

Nat. Chem. 2020, 12, 405-411, 10.1038/s41557-020-0423-6

Three-stranded coiled coils are peptide structures constructed from amphipathic heptad repeats. Here we show that it is possible to form pure heterotrimeric three-stranded coiled coils by combining three distinct characteristics: (1) a cysteine sulfur layer for metal coordination, (2) a thiophilic, trigonal pyramidal metalloid (Pb(ii)) that binds to these sulfurs and (3) an adjacent layer of reduced steric bulk generating a cavity where water can hydrogen bond to the cysteine sulfur atoms. Cysteine substitution in an a site yields Pb(ii)A2B heterotrimers, while d sites provide pure Pb(ii)C2D or Pb(ii)CD2 scaffolds. Altering the metal from Pb(ii) to Hg(ii) or shifting the relative position of the sterically less demanding layer removes heterotrimer specificity. Because only two of the eight or ten hydrophobic layers are perturbed, catalytic sites can be introduced at other regions of the scaffold. A Zn(ii)(histidine)3(H2O) centre can be incorporated at a remote location without perturbing the heterotrimer selectivity, suggesting a unique strategy to prepare dissymmetric catalytic sites within self-assembling de novo-designed proteins.

Pecoraro, V.L.

Nat. Chem. 2012, 4, 118-123, 10.1038/NCHEM.1201

Metal ions are an important part of many natural proteins, providing structural, catalytic and electron transfer functions. Reproducing these functions in a designed protein is the ultimate challenge to our understanding of them. Here, we present an artificial metallohydrolase, which has been shown by X-ray crystallography to contain two different metal ions—a Zn(II) ion, which is important for catalytic activity, and a Hg(II) ion, which provides structural stability. This metallohydrolase displays catalytic activity that compares well with several characteristic reactions of natural enzymes. It catalyses p-nitrophenyl acetate (pNPA) hydrolysis with an efficiency only ~100-fold less than that of human carbonic anhydrase (CA)II and at least 550-fold better than comparable synthetic complexes. Similarly, CO2 hydration occurs with an efficiency within ~500-fold of CAII. Although histidine residues in the absence of Zn(II) exhibit pNPA hydrolysis, miniscule apopeptide activity is observed for CO2 hydration. The kinetic and structural analysis of this first de novo designed hydrolytic metalloenzyme reveals necessary design features for future metalloenzymes containing one or more metals.

Song, W.J.; Tezcan, F.A.

J. Am. Chem. Soc. 2017, 139, 16772-16779, 10.1021/jacs.7b08981

We describe the design and evolution of catalytic hydrolase activity on a supramolecular protein scaffold, Zn4:C96RIDC14, which was constructed from cytochrome cb562 building blocks via a metal-templating strategy. Previously, we reported that Zn4:C96RIDC14 could be tailored with tripodal (His/His/Glu), unsaturated Zn coordination motifs in its interfaces to generate a variant termed Zn8:A104AB34, which in turn displayed catalytic activity for the hydrolysis of activated esters and β-lactam antibiotics. Zn8:A104AB34 was subsequently subjected to directed evolution via an in vivo selection strategy, leading to a variant Zn8:A104/G57AB34 which displayed enzyme-like Michaelis–Menten behavior for ampicillin hydrolysis. A criterion for the evolutionary utility or designability of a new protein structure is its ability to accommodate different active sites. With this in mind, we examined whether Zn4:C96RIDC14 could be tailored with alternative Zn coordination sites that could similarly display evolvable catalytic activities. We report here a detailed structural and functional characterization of new variant Zn8:AB54, which houses similar, unsaturated Zn coordination sites to those in Zn8:A104/G57AB34, but in completely different microenvironments. Zn8:AB54 displays Michaelis–Menten behavior for ampicillin hydrolysis without any optimization. Yet, the subsequent directed evolution of Zn8:AB54 revealed limited catalytic improvement, which we ascribed to the local protein rigidity surrounding the Zn centers and the lack of evolvable loop structures nearby. The relaxation of local rigidity via the elimination of adjacent disulfide linkages led to a considerable structural transformation with a concomitant improvement in β-lactamase activity. Our findings reaffirm previous observations that the delicate balance between protein flexibility and stability is crucial for enzyme design and evolution.

Pecoraro, V.L.

J. Am. Chem. Soc. 2013, 135, 5895-5903, 10.1021/ja401537t

While metalloprotein design has now yielded a number of successful metal-bound and even catalytically active constructs, the question of where to put a metal site along a linear, repetitive sequence has not been thoroughly addressed. Often several possibilities in a given sequence may exist that would appear equivalent but may in fact differ for metal affinity, substrate access, or protein dynamics. We present a systematic variation of active site location for a hydrolytically active ZnHis3O site contained within a de novo-designed three-stranded coiled coil. We find that the maximal rate, substrate access, and metal-binding affinity are dependent on the selected position, while catalytic efficiency for p-nitrophenyl acetate hydrolysis can be retained regardless of the location of the active site. This achievement demonstrates how efficient, tailor-made enzymes which control rate, pKa, substrate and solvent access (and selectivity), and metal-binding affinity may be realized. These findings may be applied to the more advanced de novo design of constructs containing secondary interactions, such as hydrogen-bonding channels. We are now confident that changes to location for accommodating such channels can be achieved without location-dependent loss of catalytic efficiency. These findings bring us closer to our ultimate goal of incorporating the secondary interactions we believe will be necessary in order to improve both active site properties and the catalytic efficiency to be competitive with the native enzyme, carbonic anhydrase.

Pan, Y.

RSC Adv. 2013, 3, 22976, 10.1039/c3ra43784a

Horseradish Peroxidase (HRP) is a commercially available and prevalently used peroxidase with no specific substrate binding domain. However, after being incorporated with different metal cations, new catalytic functions were found in biomimetic oxidation of resveratrol. Based on the results of screening, Ca, Cu, Fe and Mn incorporated enzymes showed distinctive effects, either decomposition or dimerization products were observed.

Sheldon, R.A.

Can. J. Chem. 2002, 80, 622-625, 10.1139/v02-082

The catalytic Zn2+ ion was extracted from thermolysin, which had been covalently bound to Eupergit C. The apo-enzyme incorporated the oxometallate anions MoO42–, SeO42–, and WO42– with partial restoration of the proteolytic activity. Tungstate thermolysin was moderately active in the sulfoxidation of thioanisole by hydrogen peroxide, whereas its activity towards phenylmercaptoacetophenone, which was designed to bind well in the active site of thermolysin, was much higher.

Yilmaz, F.

Process Biochem. 2018, 72, 71-78, 10.1016/j.procbio.2018.06.005

Carbonic anhydrase (carbonic dehydratase) (CA) is a metalloenzyme that contains zinc (Zn2+) ion in its active site. CA catalyzes the reversible conversion of carbon dioxide and water to bicarbonate and protons. Zn2+ ions, which are present in the active site of the enzyme, interact with the substrate molecules directly and cause catalytic effect. In this study, a nano-enzyme system was designed in aqueous solutions at room temperature and under nitrogen atmosphere to use the CA enzyme without any pre-treatment and deformation in its structure. The novel concept ANADOLUCA (AmiNo Acid (monomer) Decorated and Light Underpinning Conjugation Approach) was used for this process, nano CA enzyme of size 93 nm was synthesized. The activity of the synthesized nano CA was measured following the change in absorbance during the conversion of 4-nitrophenylacetate (NPA) to 4-nitrophenylate ion at 348 nm for a period of 10 min at 25 °C compared with free CA enzyme. Km and Vmax values for nano CA enzyme were found to be 0.442 mM and 1.6 × 10−3 mM min-1, respectively, whereas Km and Vmax values for free CA were found to be 0.471 mM and 1.5 × 10−3 mM min-1, respectively. In addition to these, the Zn2+ ion present in the active site of the nano CA enzyme was replaced by rodium metal. This nanorodium-substituted CA has been investigated as a new reductase enzyme for the stereoselective hydrogenation of olefins. Then, the Zn2+ ion in the active site of the nano CA enzyme was replaced with manganese metal to enhance the enzyme structure, thereby gaining characteristics of peroxidase. This newly synthesized nano manganese-substituted CA enzyme was investigated for its role as a peroxidase, which could be an alternative for hydrogen peroxidases.

Mahy, J.-P.; Ricoux, R.

Bioorg. Med. Chem. 2014, 22, 5678-5686, 10.1016/j.bmc.2014.05.063

A new zinc(II)-cofactor coupled to a testosterone anchor, zinc(II)-N,N-bis(2-pyridylmethyl)-1,3-diamino-propa-2-ol-N′(17′-succinimidyltestosterone) (Zn-Testo-BisPyPol) 1-Zn has been synthesized and fully characterized. It has been further associated with a neocarzinostatin variant, NCS-3.24, to generate a new artificial metalloenzyme following the so-called ‘Trojan horse’ strategy. This new 1-Zn-NCS-3.24 biocatalyst showed an interesting catalytic activity as it was found able to catalyze the hydrolysis of the RNA model HPNP with a good catalytic efficiency (kcat/KM = 13.6 M−1 s−1 at pH 7) that places it among the best artificial catalysts for this reaction. Molecular modeling studies showed that a synergy between the binding of the steroid moiety and that of the BisPyPol into the protein binding site can explain the experimental results, indicating a better affinity of 1-Zn for the NCS-3.24 variant than testosterone and testosterone-hemisuccinate themselves. They also show that the artificial cofactor entirely fills the cavity, the testosterone part of 1-Zn being bound to one the two subdomains of the protein providing with good complementarities whereas its metal ion remains widely exposed to the solvent which made it a valuable tool for the catalysis of hydrolysis reactions, such as that of HPNP. Some possible improvements in the ‘Trojan horse’ strategy for obtaining better catalysts of selective reactions will be further studied.

Oohora, K.

J. Inorg. Biochem. 2019, 193, 42-51, 10.1016/j.jinorgbio.2019.01.001

Electron transfer (ET) events occurring within metalloprotein complexes are among the most important classes of reactions in biological systems. This report describes a photoinduced electron transfer between Zn porphyrin and Fe porphyrin within a supramolecular cytochrome b562 (Cyt b562) co-assembly or heterodimer with a well-defined rigid structure formed by a metalloporphyrin–heme pocket interaction and a hydrogen-bond network at the protein interface. The photoinduced charge separation (CS: kCS = 320–600 s−1) and subsequent charge recombination (CR: kCR = 580–930 s−1) were observed in both the Cyt b562 co-assembly and the heterodimer. In contrast, interestingly, no ET events were observed in a system comprised of a flexible and structurally-undefined co-assembly and heterodimers which lack the key hydrogen-bond interaction at the protein interface. Moreover, analysis of the kinetic constants of CS and CR of the heterodimer using the Marcus equation suggests that a single-step ET reaction occurs in the system. These findings provide strong support that the rigid hemoprotein-assembling system containing an appropriate hydrogen-bond network at the protein interface is essential for monitoring the ET reaction.

Seelig, B.; Szostak, J.W.

Nature 2007, 448, 828-831, 10.1038/nature06032

Enzymes are exceptional catalysts that facilitate a wide variety of reactions under mild conditions, achieving high rate-enhancements with excellent chemo-, regio- and stereoselectivities. There is considerable interest in developing new enzymes for the synthesis of chemicals and pharmaceuticals1,2,3 and as tools for molecular biology. Methods have been developed for modifying and improving existing enzymes through screening, selection and directed evolution4,5. However, the design and evolution of truly novel enzymes has relied on extensive knowledge of the mechanism of the reaction6,7,8,9,10. Here we show that genuinely new enzymatic activities can be created de novo without the need for prior mechanistic information by selection from a naive protein library of very high diversity, with product formation as the sole selection criterion. We used messenger RNA display, in which proteins are covalently linked to their encoding mRNA11, to select for functional proteins from an in vitro translated protein library of >1012independent sequences without the constraints imposed by any in vivo step. This technique has been used to evolve new peptides and proteins that can bind a specific ligand12,13,14,15,16,17,18, from both random-sequence libraries12,14,15,16 and libraries based on a known protein fold17,18. We now describe the isolation of novel RNA ligases from a library that is based on a zinc finger scaffold18,19, followed by in vitro directed evolution to further optimize these enzymes. The resulting ligases exhibit multiple turnover with rate enhancements of more than two-million-fold.

Lerner, R.A.

Science 1989, 243, 1184-1188, 10.1126/science.2922606

Monoclonal antibodies have been induced that are capable of catalyzing specific hydrolysis of the Gly-Phe bond of peptide substrates at neutral pH with a metal complex cofactor. The antibodies were produced by immunizing with a Co(III) triethylenetetramine (trien)-peptide hapten. These antibodies as a group are capable of binding trien complexes of not only Co(III) but also of numerous other metals. Six peptides were examined as possible substrates with the antibodies and various metal complexes. Two of these peptides were cleaved by several of the antibodies. One antibody was studied in detail, and cleavage was observed for the substrates with the trien complexes of Zn(II), Ga(III), Fe(III), In(III), Cu(II), Ni(II), Lu(III), Mg(II), or Mn(II) as cofactors. A turnover number of 6 x 10(-4) per second was observed for these substrates. These results demonstrate the feasibility of the use of cofactor-assisted catalysis in an antibody binding site to accomplish difficult chemical transformations.

Seelig, B.

Nat. Chem. Biol. 2013, 9, 81-83, 10.1038/nchembio.1138

Engineering functional protein scaffolds capable of carrying out chemical catalysis is a major challenge in enzyme design. Starting from a noncatalytic protein scaffold, we recently generated a new RNA ligase by in vitro directed evolution. This artificial enzyme lost its original fold and adopted an entirely new structure with substantially enhanced conformational dynamics, demonstrating that a primordial fold with suitable flexibility is sufficient to carry out enzymatic function.

Song, W.J.

Chem. Sci. 2021, 12, 5091-5101, 10.1039/d0sc06823c

Directed evolution has provided us with great opportunities and prospects in the synthesis of tailor-made proteins. It, however, often requires at least mid to high throughput screening, necessitating more effective strategies for laboratory evolution. We herein demonstrate that protein symmetry can be a versatile criterion for searching for promising hotspots for the directed evolution of de novo oligomeric enzymes. The randomization of symmetry-related residues located at the rotational axes of artificial metallo-β-lactamase yields drastic effects on catalytic activities, whereas that of non-symmetry-related, yet, proximal residues to the active site results in negligible perturbations. Structural and biochemical analysis of the positive hits indicates that seemingly trivial mutations at symmetry-related spots yield significant alterations in overall structures, metal-coordination geometry, and chemical environments of active sites. Our work implicates that numerous artificially designed and natural oligomeric proteins might have evolutionary advantages of propagating beneficial mutations using their global symmetry.