8 publications

8 publications

A Cofactor Approach to Copper-Dependent Catalytic Antibodies

Janda, K.D.; Nicholas, K.M.

Proc. Natl. Acad. Sci. U. S. A. 2002, 99, 2648-2653, 10.1073/pnas.052001099

A strategy for the preparation of semisynthetic copper(II)-based catalytic metalloproteins is described in which a metal-binding bis-imidazole cofactor is incorporated into the combining site of the aldolase antibody 38C2. Antibody 38C2 features a large hydrophobic-combining site pocket with a highly nucleophilic lysine residue, LysH93, that can be covalently modified. A comparison of several lactone and anhydride reagents shows that the latter are the most effective and general derivatizing agents for the 38C2 Lys residue. A bis-imidazole anhydride (5) was efficiently prepared from N-methyl imidazole. The 38C2–5-Cu conjugate was prepared by either (i) initial derivatization of 38C2 with 5 followed by metallation with CuCl2, or (ii) precoordination of 5 with CuCl2 followed by conjugation with 38C2. The resulting 38C2–5-Cu conjugate was an active catalyst for the hydrolysis of the coordinating picolinate ester 11, following Michaelis–Menten kinetics [kcat(11) = 2.3 min−1 and Km(11) 2.2 mM] with a rate enhancement [kcat(11)kuncat(11)] of 2.1 × 105. Comparison of the second-order rate constants of the modified 38C2 and the Cu(II)-bis-imidazolyl complex k(6-CuCl2) gives a rate enhancement of 3.5 × 104 in favor of the antibody complex with an effective molarity of 76.7 M, revealing a significant catalytic benefit to the binding of the bis-imidazolyl ligand into 38C2.


Metal: Cu
Ligand type: Bisimidazol
Host protein: Antibody 38C2
Anchoring strategy: Covalent
Optimization: Genetic
Max TON: ---
ee: ---
PDB: ---
Notes: ---

A Hybrid Ring- Opening Metathesis Polymerization Catalyst Based on an Engineered Variant of the Beta-Barrel Protein FhuA

Okuda, J.; Schwaneberg, U.

Chem. - Eur. J. 2013, 19, 13865-13871, 10.1002/chem.201301515

A β‐barrel protein hybrid catalyst was prepared by covalently anchoring a Grubbs–Hoveyda type olefin metathesis catalyst at a single accessible cysteine amino acid in the barrel interior of a variant of β‐barrel transmembrane protein ferric hydroxamate uptake protein component A (FhuA). Activity of this hybrid catalyst type was demonstrated by ring‐opening metathesis polymerization of a 7‐oxanorbornene derivative in aqueous solution.


Metal: Ru
Ligand type: Carbene
Anchoring strategy: Covalent
Optimization: Chemical
Reaction: Olefin metathesis
Max TON: 955
ee: ---
PDB: ---
Notes: ROMP

Albumin as a Promiscuous Biocatalyst in Organic Synthesis

Review

Gaggero, N.

RSC Adv. 2015, 5, 10588-10598, 10.1039/C4RA11206G

Albumin emerged as a biocatalyst in 1980 and the continuing interest in this protein is proved by numerous papers.


Notes: ---

A Whole Cell E. coli Display Platform for Artificial Metalloenzymes: Poly(phenylacetylene) Production with a Rhodium–Nitrobindin Metalloprotein

Schwaneberg, U.

ACS Catal. 2018, 8, 2611-2614, 10.1021/acscatal.7b04369

Whole cell catalysis is, in many cases, a prerequisite for the cost-effective production of chemicals by biotechnological means. Synthetic metal catalysts for bioorthogonal reactions can be inactivated within cells due to abundant thiol derivatives. Here, a cell surface display-based whole cell biohybrid catalyst system (termed ArMt bugs) is reported as a generally applicable platform to unify cost-effective whole cell catalysis with biohybrid catalysis. An inactivated esterase autotransporter is employed to display the nitrobindin protein scaffold with a Rh catalyst on the E. coli surface. Stereoselective polymerization of phenylacetylene yielded a high turnover number (TON) (39 × 106 cell–1) for the ArMt bugs conversion platform.


Metal: Rh
Ligand type: COD; Cp
Host protein: Nitrobindin variant NB4
Anchoring strategy: Cystein-maleimide
Optimization: ---
Max TON: 3046
ee: ---
PDB: ---
Notes: Calculated in vivo TON assuming 12800 metalloenzymes per E. coli cell

Chemogenetic Evolution of a Peroxidase-like Artificial Metalloenzyme

Okuda, J.; Schwaneberg, U.

ACS Catal. 2021, 11, 5079-5087, 10.1021/acscatal.1c00134

Directed evolution has helped enzyme engineering to remarkable successes in the past. A main challenge in directed evolution is to find the most suitable starting point, that is, an enzyme that allows maximum “evolvability”. Consisting of a synthetic cofactor embedded in a protein scaffold, artificial metalloenzymes (ArMs) are reminiscent of rough-hewn ancestral metalloproteins and thus could provide an evolutionarily clean slate. Here, we report the design and directed evolution of an ArM with peroxidase-like properties based on the nitrobindin variant, NB4. After identifying a suitable artificial metal cofactor, two rounds of directed evolution were sufficient to elevate the ArM’s activity to levels akin to those of some natural peroxidases (up to kcat = 14.1 s–1 and kcat/Km = 52,800 M–1 s–1). A substitution to arginine in the distal cofactor environment (position 76) was the key to boost the peroxidase activity. Molecular dynamics simulations reveal a remarkable flexibility in the distal site of the NB4 scaffold that is absent in the nitrobindin wildtype and which allows the unrestricted movement of the catalytically important Arg76. In addition to the oxidation of the common redox mediators (ABTS, syringaldehyde, and 2,6-dimethoxyphenol), the ArM proved efficient in the decolorization of three recalcitrant dyes (indigo carmine, reactive blue 19, and reactive black 5) and was amenable to several rounds of ArM recycling.


Metal: Mn
Ligand type: Porphyrin
Host protein: Nitrobindin (Nb)
Anchoring strategy: Supramolecular
Optimization: Chemical & genetic
Reaction: Oxidation
Max TON: ---
ee: ---
PDB: ---
Notes: kcat = 14.1 s−1 and kcat/Km = 52,800 M−1 s −1

Engineering and Emerging Applications of Artificial Metalloenzymes with Whole Cells

Review

Sauer, D.F.; Schwaneberg, U.

Nat. Catal. 2021, 4, 814-827, 10.1038/s41929-021-00673-3

The field of artificial metalloenzymes (ArMs) is rapidly growing and ArMs are attracting increasing attention, for example, in the fields of biosensing and drug therapy. Protein-engineering methods that are commonly used to tailor the properties of natural enzymes are more frequently included in the design of ArMs. In particular, directed evolution allows the fine-tuning of ArMs, ultimately assisting in the development of their enormous potential. The integration of ArMs in whole cells enables their in vivo application and facilitates high-throughput directed-evolution methodologies. In this Review, we highlight the recent progress of whole-cell conversions and applications of ArMs and critically discuss their limitations and prospects. To focus on ArMs and their specific properties, advantages and challenges, the evolution of natural enzymes for non-natural reactions will not be covered.


Notes: ---

Multifunctional Nanoenzymes from Carbonic Anhydrase Skeleton

Yilmaz, F.

Process Biochem. 2018, 72, 71-78, 10.1016/j.procbio.2018.06.005

Carbonic anhydrase (carbonic dehydratase) (CA) is a metalloenzyme that contains zinc (Zn2+) ion in its active site. CA catalyzes the reversible conversion of carbon dioxide and water to bicarbonate and protons. Zn2+ ions, which are present in the active site of the enzyme, interact with the substrate molecules directly and cause catalytic effect. In this study, a nano-enzyme system was designed in aqueous solutions at room temperature and under nitrogen atmosphere to use the CA enzyme without any pre-treatment and deformation in its structure. The novel concept ANADOLUCA (AmiNo Acid (monomer) Decorated and Light Underpinning Conjugation Approach) was used for this process, nano CA enzyme of size 93 nm was synthesized. The activity of the synthesized nano CA was measured following the change in absorbance during the conversion of 4-nitrophenylacetate (NPA) to 4-nitrophenylate ion at 348 nm for a period of 10 min at 25 °C compared with free CA enzyme. Km and Vmax values for nano CA enzyme were found to be 0.442 mM and 1.6 × 10−3 mM min-1, respectively, whereas Km and Vmax values for free CA were found to be 0.471 mM and 1.5 × 10−3 mM min-1, respectively. In addition to these, the Zn2+ ion present in the active site of the nano CA enzyme was replaced by rodium metal. This nanorodium-substituted CA has been investigated as a new reductase enzyme for the stereoselective hydrogenation of olefins. Then, the Zn2+ ion in the active site of the nano CA enzyme was replaced with manganese metal to enhance the enzyme structure, thereby gaining characteristics of peroxidase. This newly synthesized nano manganese-substituted CA enzyme was investigated for its role as a peroxidase, which could be an alternative for hydrogen peroxidases.


Metal: Zn
Ligand type: Amino acid
Host protein: Carbonic anhydrase (CA)
Anchoring strategy: Metal substitution
Optimization: Chemical
Reaction: Hydrolysis
Max TON: ---
ee: ---
PDB: ---
Notes: Cross-linked carbonic anhydrase nano-enzyme particles (93 nm in diameter). Hydrolysis of 4-nitrophenyl acetate.

Metal: Rh
Ligand type: Amino acid
Host protein: Carbonic anhydrase (CA)
Anchoring strategy: Metal substitution
Optimization: Chemical
Reaction: Hydration
Max TON: ---
ee: ---
PDB: ---
Notes: Cross-linked carbonic anhydrase nano-enzyme particles (93 nm in diameter). Hydration of styrene.

Metal: Mn
Ligand type: Amino acid
Host protein: Carbonic anhydrase (CA)
Anchoring strategy: Metal substitution
Optimization: Chemical
Reaction: Oxidation
Max TON: ---
ee: ---
PDB: ---
Notes: Cross-linked carbonic anhydrase nano-enzyme particles (93 nm in diameter). Oxidation of styrene.

Towards Evolution of Artificial Metalloenzymes - A Protein Engineer’s Perspective

Review

Schwaneberg, U.

Angew. Chem. Int. Ed. 2019, 58, 4454-4464, 10.1002/anie.201811042

Incorporating artificial metal‐cofactors into protein scaffolds results in a new class of catalysts, termed biohybrid catalysts or artificial metalloenzymes. Biohybrid catalysts can be modified chemically at the first coordination sphere of the metal complex, as well as at the second coordination sphere provided by the protein scaffold. Protein‐scaffold reengineering by directed evolution exploits the full power of nature's diversity, but requires validated screening and sophisticated metal cofactor conjugation to evolve biohybrid catalysts. In this Minireview, we summarize the recent efforts in this field to establish high‐throughput screening methods for biohybrid catalysts and we show how non‐chiral catalysts catalyze reactions enantioselectively by highlighting the first successes in this emerging field. Furthermore, we shed light on the potential of this field and challenges that need to be overcome to advance from biohybrid catalysts to true artificial metalloenzymes.


Notes: ---